速率陀螺解相遇与敌我态势的关系

根据敌我相对运动的原理,导出速率陀螺测量出的目标俯仰角速度Ω_s、测向角速度Ω_L 和探测器测出的距变率与敌我姿势要素间的关系,提出了距变率在极短时间内保持不变的条件;并利用Ω_s、Ω_L 和有关数据(qw,ε、D、■、V_w、K_w)推导出在不满足“快解”条件时计算目标运动要素和弹丸发射诸元的计算公式。     

高速核在高温热平衡等离子体中的非平衡弛豫过程对热核反应率参数的影响

高速核入射到高温热平衡等离子体背景中,由于入射核动能远大于背景等离体中带电粒子之平均动能,入射核在与背景等离子体达到热平衡之前,会存在一段逐渐损失能量的非平衡弛豫过程。本文以高速氘核入射到高温氘化锂等离子体为例,在计及氘核的这种非平衡弛豫过程时,给出了一种计算热核反应D(t,n)~4He之反应率参数的方法。氘核在弛豫过程中的能量损失考虑了氘核与各种带电粒子的库仑散射过程,其能量损失率采用快速带电粒子的慢化理论来计算;氘与背景等离子体中的原子核发生的核反应过程,考虑了非平衡状态下束靶机制的D(t,n)~4He反应和热平衡状态下的D(t.n)~4He反应。在暂未考虑核散射的情况下,计算结果表明,当等离子体温度在7.5KeV～20KeV范围内变化时,氘核的非平衡弛豫过程对热平衡状态下D(t,n)~4He反应率参数的修正因子大致在1.0062～1.0943范围内变动,且温度越高,修正因子越小。计算还表明,当温度一定时,修正因子随等离子体中粒子的数密度变化不明显。     

综合全球定位导航／火控系统性能模拟

描述综合全球定位导航／火控系统。在此基础上描述这种系统的模拟方法、模拟中采用的误差、卡尔曼滤波技术。简要总结了模拟的条件,并给出了两个示例的结果。     

三态部件的可靠性分析

本文给出完备的三态部件的可靠性模型类。从静态的观点来看,三态部件的可靠性模型有两类：（１）成功,降格成功,失败;（２）成功,双失败。从动态的观点来看,考虑到三个状态之间的转化关系,其模型类相对复杂;但是在失败率λ、维修率μ为常数的条件下,只需六个参数（λ１λ２λ３μ１μ２μ３）,便可以用马尔可夫模型给出三态部件的可靠性统一模型,并给出部件在三状态的概率函数Ｐｉ（ｔ）的解析表达式（ｔ为时间,ｉ表示状态）。     

基于故障树分析的航空装备体系结构贡献率评估方法

针对航空装备体系构成复杂的特点,将故障树分析引入航空装备体系结构贡献率评估问题,提出基于故障树分析的评估方法。从作战装备、信息支援装备和保障装备三个方面构建航空装备体系结构,建造航空装备体系结构故障树;采用底事件的关键重要度指标来计算航空装备的体系结构贡献率,建立基于关键重要度的航空装备体系结构贡献率评估模型;以某航空装备体系为例进行建模分析。分析结果表明:所提方法能够准确评估航空装备体系结构贡献率,为确定航空装备体系结构短板、优化航空装备体系结构等提供方法支撑。     

Numerical modelling of non-ideal detonation in ANFO explosives applying Wood-Kirkwood theory coupled with EXPLO5 thermochemical code

Ammonium nitrate and fuel oil (ANFO) based explosive is a classic example of non-ideal high explosives. Its detonation is characterized by a strong dependence of detonation parameters on explosive charge diameter, presence and characteristics of confinement, as well as incomplete consumption of explosive at the sonic point.In this work we propose a detonation model based on the Wood-Kirkwood (WK) theory coupled with the thermochemical code EXPLO5 and supplemented with reaction rate models. Our objective is to analyze the validity of the model for highly non-ideal ANFO explosives, with emphasis on effect of reaction rate models.It was found that both single-step and two-step pressure-based models can be calibrated to reproduce experimental detonation velocity-charge radius data of ANFO at radii significantly above the failure radius (i.e. for D/D_id > ∼0.6). Single-step pressure-based model, with the pressure exponent equal to 1.4, proved to be the most accurate, even in the vicinity of the failure radius. The impact of the rate models is most evident on temporal (and spatial) distribution of flow parameters in detonation driving zone, especially when it comes to the conversion and width of detonation driving zone.     

Increasing of photostability of HNS explosive in the presence of UV photostabilizers

The photostabilies of hexanitrostillbene(HNS)were studied at 1％wt.of photostabilizers.The photo-stabilizers of Chiguard BP-12(UV-531),ADK STAB LA-326(UV-326),ADK STAB LA-32(UV-P),Irganox 1010 and Everstab LS944 were used in this study.A photoreactor including a 30 W monochromatic UV lamp was used for investigation of photodegradations of solid HNS.The changes in surface area of HNS peak in HPLC chromatogram at time intervals of 2,4,6 and 8 h were used for calculation of kinetic rate constants of photodegradation process.The compound of UV-P photostabilizer was found to have the greatest effect on enhancing photostability for HNS among the investigated photostabilizers.The kinetic rate constants were obtained 6.2 × 10-2 and 4.1 × 10-2 h-1,respectively,for photodegradation process of HNS in absence and in presence of UV-P.     

Mechanical behavior and failure mechanism of polyurea nanocomposites under quasi-static and dynamic compressive loading

Polyurea is an elastomeric material that can be applied to enhance the protection ability of structures under blast and impact loading.In order to study the compressive mechanical properties of SiC/polyurea nanocomposites under quasi-static and dynamic loading,a universal testing machine and split Hop-kinson pressure bar(SHPB)apparatus were used respectively.The stress-strain curves were obtained on polyurea and its composites at strain rates of 0.001-8000 s-1.The results of the experiment suggested that increase in the strain rates led to the rise of the flow stress,compressive strength,strain rate sensitivity and strain energy.This indicates that all of the presented materials were dependent on strain rate.Moreover,these mechanical characters were enhanced by incorporating a small amount of SiC into polyurea matrix.The relation between yield stress and strain rates were established using the power law functions.Finally,in order to investigate the fracture surfaces and inside information of failed specimens,scanning electron microscopy(SEM)and micro X-ray computed tomography(micro-CT)were used respectively.Multiple voids,crazes,micro-cracks and cracking were observed in fracture surfaces.On the other hand,the cracking propagation was found in the micro-CT slice images.It is essential to understand the deformation and failure mechanisms in all the polyurea materials.     

配套装备器材的库存与运输集成优化研究

针对我军配套装备器材订货的特点，在考虑库存容量空间限制与整套装备的最低期望满足率两种约束条件下，建立了配套装备器材的库存与运输优化模型，并应用改进的动态规划方法进行求解。结果表明：应用库存与运输的优化模型，在保障军事目标实现的前提下，有效地降低了物流成本。